Formulas

Beginner method: all the formulas

Every case of the method with its formula, step by step. Hold your cube as the case's hint says before applying its formula.

Step 1 · Cross

  • On top, white up

    The edge is on top, white facing up: turn U until it is at the front, its other colour above the front centre.

    F2 → piece in place

  • On top, white in front

    The edge is on top, white on the side: turn U until it is at the front, white facing you.

    U' R' F R → piece in place

  • Middle right, white on the right

    The edge is in the middle layer, front right, white on the right face.

    F → piece in place

  • Middle left, white on the left

    The edge is in the middle layer, front left, white on the left face.

    F' → piece in place

Step 2 · First layer corners

  • On top, white on the right

    The corner is on top: turn U until it is at the front right, above its place, white on the right face.

    R U R' → piece in place

  • On top, white in front

    The corner is on top: turn U until it is at the front right, above its place, white facing you.

    F' U' F → piece in place

  • On top, white up

    The corner is on top, white facing up: turn U until it is at the front right, above its place.

    R U2 R' U' R U R' → piece in place

  • At the bottom, white in front

    The corner is already at the bottom front right, but its white faces you.

    R U R' U' → On top, white up

  • At the bottom, white on the right

    The corner is already at the bottom front right, but its white is on the right face.

    R U R' U' → On top, white on the right

Step 3 · Middle layer edges

  • On top, goes right

    The edge is on top: turn U until it is at the front, its front colour above the front centre and its top colour that of the right centre.

    U R U' R' U' F' U F → piece in place

  • On top, goes to the front

    The edge is on top: turn U until it is on the right, its right colour above the right centre and its top colour that of the front centre.

    U' F' U F U R U' R' → piece in place

  • In place, flipped

    The edge is already at the front right, but its colours are swapped.

    U R U' R' U' F' U F → On top, goes right

Step 4 · Yellow cross

  • Dot

    Hold the cube yellow on top, any way round: only the top centre is yellow.

    F R U R' U' F' → L shape

  • L shape

    Turn U until the yellow L sits on the back and left edges of the top.

    F U R U' R' F' → piece in place

  • Line

    Turn U until the yellow line is horizontal, from left to right.

    F R U R' U' F' → piece in place

Step 5 · Yellow face orientation

  • Fish (Sune)

    Only one top corner is yellow: turn U to put it at the front left. The front-right corner shows its yellow towards you.

    R U R' U R U2 R' → piece in place

  • Reverse fish (Antisune)

    Only one top corner is yellow: turn U to put it at the front left. The front-right corner shows its yellow on the right face.

    R U R' U R U2 R' → Fish (Sune)

  • H

    No top corner is yellow. Turn U until the left face and the right face each show two yellows at the top.

    R U R' U R U2 R' → Fish (Sune)

  • Pi

    No top corner is yellow. Turn U until the left face shows two yellows side by side at the top.

    R U R' U R U2 R' → Fish (Sune)

  • Headlights (U)

    Two neighbouring top corners are yellow: turn U to put them at the back. The two front corners show their yellow towards you.

    R U R' U R U2 R' → Reverse fish (Antisune)

  • T

    Two neighbouring top corners are yellow: turn U to put them on the right. The front-left corner shows its yellow towards you.

    R U R' U R U2 R' → Reverse fish (Antisune)

  • Bowtie (L)

    Two opposite top corners are yellow: turn U to put them at the back left and front right, with the yellow of the front-left corner facing you.

    R U R' U R U2 R' → Reverse fish (Antisune)

Step 6 · Corner placement

  • Two adjacent corners placed

    Turn U until two neighbouring corners are placed (their colours match the centres), then turn the whole cube to put them at the back. The two front corners need swapping.

    R' F R' B2 R F' R' B2 R2 U' → piece in place

  • Two opposite corners placed

    Turn U until two diagonally opposite corners are placed, then turn the whole cube so they sit at the front left and back right. The other two corners need swapping.

    R' F R' B2 R F' R' B2 R2 U' → Two adjacent corners placed

Step 7 · Edge placement

  • Three edges, to the right

    Turn the whole cube to put the edge that is already placed at the back. The front edge must go to the right, the right one to the left, the left one to the front.

    R U' R U R U R U' R' U' R2 → piece in place

  • Three edges, to the left

    Turn the whole cube to put the edge that is already placed at the back. The front edge must go to the left, the left one to the right, the right one to the front.

    R U' R U R U R U' R' U' R2 → Three edges, to the right

  • Opposite edges swapped

    No edge is placed: the front one must go to the back, the left one to the right. Hold the cube any way round.

    R U' R U R U R U' R' U' R2 → Three edges, to the right

  • Adjacent edges swapped

    No edge is placed, and they swap in pairs with a neighbour. Turn the whole cube so the front edge must go to the right, and the right one to the front.

    R U' R U R U R U' R' U' R2 → Three edges, to the right